Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
Engine Block Heater: Service and Repair
Engine Block Heater - Removal
REMOVAL
WARNING: Risk of injury to skin and eyes due to scalding from hot coolant. Do not open the cooling system unless the temperature is below
90°C (194°F). Wear protective clothing and eye wear. Risk of poisoning if coolant is swallowed. Store coolant in proper and appropriately
marked containers.
1. Disconnect the negative battery cable.
2. Drain the cooling system.
3. Record the location and snip the wire ties.
4. Unscrew the engine block heater from the core plug hole and remove.
