Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
![background image](/dodge/sprinter_2500/v6-3.0l_dsl_turbo_vin_45/Page-2147007.png)
15.
Place the two large red wires from the new relay harness together with the black wire that was removed from the number 10 relay connector. Place
the barrel connector over all three wires (Figure 7).
16.
Using rosin core solder and a soldering gun, heat the three wires and barrel connector. Fill the barrel connector with molten solder (Figure 8).
17.
Allow the wire barrel connection to cool and then install the yellow insulating boot (provided) over the barrel connector.