Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
EGR Tube: Service and Repair
Removal
Removal - Front EGR Tube
REMOVAL - FRONT EGR TUBE
1. Disconnect the negative battery cable.
2. Remove the front EGR tube upper bolts (1).
3. Remove the front EGR tube lower bolts (3), and remove the front EGR tube (4).
Removal - Rear EGR Tube
REMOVAL - REAR EGR TUBE
1. Disconnect the battery negative cable.
2. Remove the engine cover.
3. Remove the air filter housing.
4. Remove the rear EGR tube bracket bolts (1).
5. Remove the rear EGR tube lower bolts (1).
