Sprinter 2500 V6-3.0L DSL Turbo VIN 45 (2007)
through the small hole in the steel strap. The entire wiper arm has a satin black finish applied to all of its visible surfaces.
Near the wiper blade bracket of each wiper arm steel strap, a rear washer nozzle (2) is mounted with a clamshell-type retainer to the wiper arm. A
U-shaped molded plastic guard (3) snaps onto the underside of the strap to conceal and protect the washer nozzle hose (4). A unique molded plastic hose
fitting (6) connects the nozzle washer hose to the washer fluid supply through a fitting in the center of the rear wiper motor output shaft with a snap fit.
The rear wiper arms are not interchangeable. A wiper arm cannot be adjusted or repaired and, if ineffective or damaged, it must be replaced. The washer
nozzle, nozzle hose, hose guard and hose fitting are available for individual service replacement.