Sprinter 3500 L5-2.7L DSL Turbo (2004)
4
Repair damaged primer layer (flashlight test) with primer.
Shake primer tube for at least 30 seconds before use. To open, hold threaded primer tube connection pointing upwards, and screw felt
applicator on to stop.
5
Check primer application.
The primer is applied properly when the screen print in the application area is opaque to light (flashlight test). If more than 12 hours have
expired since leveling the bead of glue apply primer to entire bead of glue.
Allow primer to air-dry for min. 10 minutes
B. When installing new window.
6
Rub area to be glued with moist cleaning rag from package (glass cleaning set) and rub dry with drying rag from package (glass cleaning set)
Do not use commercially available glass cleaners.
7
Apply primer on gluing surface of window directly at the window edge.
Shake primer tube for at least 30 seconds before use. To open, hold threaded primer tube connection pointing upwards, and screw felt
applicator on to stop. Hold application sponge crosswise (wide application range).
Allow primer to air-dry for at least 10 minutes.
8
Check primer application.
The primer is applied properly when the screen print in the application area is opaque to light (flashlight test).