Sprinter 3500 L5-2.7L DSL Turbo (2004)
Parking Brake Shoe: Service and Repair
SHOES
REMOVAL - (SRW)
1. Raise and support the vehicle.
2. Remove the rear wheels.
3. Remove the disc brake rotor.
4. Disconnect the front park brake cable from the pulley unit. Do not remove the rear park brake cables.
5. Remove the retracting springs using special tool 9280 (Fig. 36).
6. Remove the adjuster (Fig. 36).
7. Remove the pressure springs using special tool 9281 (Fig. 36).
8. Remove the rear park brake shoes (Fig. 36). Pull the park brake shoes apart at the bottom and remove them together with the adjuster.
REMOVAL - (DRW)
1. Raise and support the vehicle.
2. Remove the rear wheels.
3. Remove the wheel flange ring.
4. Remove the disc brake rotor.
5. Disconnect the front park brake cable from the pulley unit. Do not remove the rear park brake cables.