Sprinter 3500 L5-2.7L DSL Turbo (2004)
Air Duct: Service and Repair
Floor Distribution Ducts Replacement
REMOVAL
1. Remove the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Instrument
Panel Assembly Replacement, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel Assembly
2. Remove the defroster ducts.
Floor Distribution Duct, RH Shown, LH Typical
3. Remove the screws that secure the left and right floor distribution ducts to the instrument panel support.
4. Remove floor distribution ducts from the center floor distribution duct.
5. Remove the shift mechanism.
6. Remove center floor distribution duct from the heater housing.
INSTALLATION
1. Install the center floor distribution duct onto the heater housing.
2. Install the shift mechanism.
3. Install the left and right floor distribution ducts onto the center floor distribution duct.
4. Install the left and right floor distribution duct retaining screws to the instrument panel support. Tighten the screws to 2 Nm (17 in. lbs.).
5. Install the defroster ducts.
6. Install the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Instrument Panel
Assembly Replacement, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel
Assembly