Sprinter 3500 L5-2.7L DSL Turbo (2004)
Pulley Snap Ring
7. Using snap ring pliers (Special Tool C-4574 or equivalent), remove the external snap ring that secures the compressor clutch pulley to the front of
the compressor, then slide the pulley off of the compressor.
8. Remove the screw that secures the clutch coil wire harness connector bracket and ground clip to the top of the compressor housing.
Clutch Coil Snap Ring
9. Using snap ring pliers (Special Tool C-4574 or equivalent), remove the external snap ring that secures the compressor clutch coil to the front of
the compressor, then slide the clutch coil off of the compressor.
INSPECTION
Compressor clutch components should always be inspected closely before they are reinstalled. The clutch plate and clutch pulley are mated at the factory
using a burnishing operation. No attempt should be made to separately replace the compressor clutch pulley or clutch plate. The clutch coil may be
serviced separately.