Sprinter 3500 L5-2.7L DSL Turbo (2004)
Map Light Bulb: Service and Repair
Dome/Reading Lamp Bulb
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the dome/reading lamp unit from its mounting location, but do not disconnect the vehicle wire harness from the lamp connector
receptacle.
Dome/Reading Lamp Bulb Remove/Install
3. Grasp the lamp housing in one hand and carefully pull the bulb out of the bulb holder with the other hand.
INSTALLATION
1. Grasp the dome/reading lamp housing in one hand and carefully insert the bulb into the bulb holder with the other hand.
2. Reinstall the dome/reading lamp unit into its mounting location.
3. Reconnect the battery negative cable.