Sprinter 3500 L5-2.7L DSL Turbo (2004)
Alignment: Service and Repair
Wheel Alignment
STANDARD PROCEDURE - TOE ADJUSTMENT
CAMBER AND CASTER ARE NOT ADJUSTABLE (TOE ONLY)..
The wheel toe position adjustment is the final adjustment.
1. Start the engine and turn wheels both ways before straightening the wheels. Secure the steering wheel with the front wheels in the straight-ahead
position.
2. Loosen the tie rod jam nuts.
NOTE: Each front wheel should be adjusted for one-half of the total toe position specification. This will ensure the steering wheel will be centered
when the wheels are positioned straight-ahead.
3. Adjust the wheel toe position by turning the inner tie rod as necessary.
4. Tighten the tie rod jam nut to 50 Nm (37 ft. lbs.).
5. Verify the specifications
6. Turn off engine.