Sprinter 3500 L5-2.7L DSL Turbo (2004)
2. Remove locking pin (1) (Fig. 150). Remove the plate of the locking pin with a suitable tool and press out the pin remaining in the cap downwards.
3. Remove cap (2).
4. Add following initial quantity of required fluid to transmission:
a. If only fluid and filter were changed, add 7.4 L (14.8 pts.) of transmission fluid to transmission.
b. If transmission was completely overhauled, torque converter was replaced or drained, and cooler was flushed, add 7.7 L (16.3 pts.) of
transmission fluid to transmission.
5. Check the transmission fluid.