dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Glove Box Lamp > < Cornering Lamp Bulb|Removal|Page 6891
Page 1
background image

Ash Tray Lamp: Service and Repair

DESCRIPTION

An ash receiver (4) and cigar lighter (1) are optional equipment on this vehicle. The ash receiver and cigar lighter are located within a tray (6) that also
contains an integral coin holder and a cup holder (5). These components are all concealed within the instrument panel lower center bezel until the sliding
tray is pulled rearward. An optional bulb and bulb holder are secured by an integral mount to the outside of the cigar lighter halo ring (2), and serves to
illuminate both the translucent halo ring and the ash receiver. The lamp is connected to the panel illumination lamps circuit so that it illuminates
whenever the exterior lighting is turned ON. A small rectangular lens (3) in the inboard side of the ash receiver cup allows light from the lamp on the
halo ring to also illuminate the ash receiver.

The ash receiver/cigar lighter lamp is serviced only as a unit with the ash receiver, cigar lighter and cup holder tray unit. If the lamp is faulty or damaged,
the entire tray unit must be replaced.

Glove Box Lamp > < Cornering Lamp Bulb|Removal|Page 6891