Sprinter 3500 V6-3.0L DSL Turbo VIN 45 (2007)
13. Lower the vehicle.
14. Position the rear underbody suction line (2) and rear underbody discharge line (4) to the right front frame rail and install the fasteners (3). Tighten
the fasteners securely.
15. Connect the rear underbody suction line or the rear underbody discharge line to the front underbody suction line (6) or front underbody discharge
line (5) as necessary and install the retaining bolt(s) (1). Tighten the bolt(s) to 8 Nm (70 in. lbs.).
16. If servicing a front portion of an underbody refrigerant line, reconnect the underbody line being service to the rear A/C compressor.
17. Reconnect the negative battery cable.
18. Evacuate the rear refrigerant system.
19. Adjust the refrigerant oil level.
20. Charge the rear refrigerant system.