SRT-4 L4-2.4L Turbo VIN S (2004)
Trunk / Liftgate Switch: Service and Repair
Deck Lid Security
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Open the glove box door.
3. Using a trim stick (special tool #C-4755) or equivalent, gently pry out on the deck lid release switch and pull out of instrument panel.
4. Disconnect the wiring connector.
5. Remove switch from vehicle.
INSTALLATION
1. Connect the wiring connector.
2. Align switch in hole and firmly snap into place.
3. Close the glove box door.
4. Connect the battery negative cable.
