SRT-4 L4-2.4L Turbo VIN S (2004)
Seat Track: Description and Operation
Power Seat Track
There is one motor that operates the power seat track . The motor is connected to a worm-drive gearbox that moves the seat adjuster accordingly. The
drivers front seat can be raised or lowered using the power seat switch, located on the seat cushion side shield. When the seat switch is pushed to the Up
or Down position the seat will move up or down.
The motor contains a self-resetting circuit breaker to protect it from overload. Consecutive or frequent resetting of the circuit breakers must not be
allowed to continue, or the motors may be damaged.
The power seat track cannot be repaired, and is serviced only as a complete unit. If any component in this unit is faulty or damaged, the entire power seat
track unit must be replaced.
When a power seat switch is actuated, a battery feed and a ground path are applied through the switch contacts to the appropriate motor. The motor and
drive operate to move the seat in the selected direction until the power seat switch is released, or until the travel limit of the power seat track adjuster is
reached. When the power seat switch is moved in the opposite direction, the battery feed and ground path to the motor are reversed through the switch
contacts. This causes the motor and drive to run in the opposite direction.