SRT-4 L4-2.4L Turbo VIN S (2004)
1. With one hand, push the guide pin bushing sleeve towards the back of the caliper, and at the same time, pull the sleeve out the back of the caliper
and bushing (Fig. 74).
2. Using your fingers, collapse one side of the rubber guide pin bushing. Pull the guide pin bushing out the other side of the brake caliper mounting
boss (Fig. 75).
DISASSEMBLY (PISTON AND SEAL)
Before disassembling the brake caliper, clean and inspect it.
WARNING: UNDER NO CONDITION SHOULD HIGH PRESSURE AIR EVER BE USED TO REMOVE A PISTON FROM A CALIPER
BORE. PERSONAL INJURY COULD RESULT FROM SUCH A PRACTICE.
NOTE: The safest way to remove the piston from the caliper bore is to use the hydraulic pressure of the vehicle's brake system.
1. remove the caliper from the brake rotor and hang the assembly on a wire hook away from rotor and body of the vehicle so brake fluid cannot get