SRT-4 L4-2.4L Turbo VIN S (2004)
16. Keeping your hands clear of the automatic adjuster sector and pawl area, firmly grasp the parking brake lever pin punch (or locking pin if a new
mechanism has been installed) (Fig. 149), then quickly remove it from the parking brake lever mechanism. This will allow the park brake lever
mechanism to automatically adjust the parking brake cables.
17. Cycle the parking brake lever once to position the parking brake cables, then return the parking brake lever its released position.
18. Check the rear wheels of the vehicle. They should rotate freely without dragging with the lever in its released position.
19. Reposition the rear carpeting into place.
20. Install the rear seat cushion. Be sure the seat cushion is fully installed in the retainers on the floor pan of the vehicle.
21. Fully apply the parking brake lever.
22. Install the center console and its mounting screws.
23. Remove the blocks from the tires and wheels.