SRT-4 L4-2.4L Turbo VIN S (2004)
Valve Cover: Service and Repair
CYLINDER HEAD COVER
REMOVAL
1. Disconnect negative battery cable.
2. Disconnect ignition coil connector.
3. Disconnect spark plug wires and remove ignition coil (Fig. 37).
4. Disconnect PCV and make-up air hoses from cylinder head cover (Fig. 37).
5. Unclip wiring harness from cylinder head cover studs (Fig. 37).
6. Remove nut securing coolant return line bracket to cylinder head cover stud (Fig. 38).
NOTE: For reassembly purposes, note location of double ended studs.
7. Remove cylinder head cover fasteners.
