SRT-4 L4-2.4L Turbo VIN S (2004)
6. Remove oil pan drain plug (Fig. 99) and allow oil to drain into collecting container. Inspect drain plug threads for stretching or other damage.
Replace drain plug and gasket if damaged.
7. Remove oil filter (Fig. 99).
8. Install oil pan drain plug. Torque drain plug to 28 Nm (20 ft. lbs.).
9. Install new oil filter.
10. Lower vehicle and fill crankcase with specified type and amount of engine oil (Refer to LUBRICATION & MAINTENANCE/SPECIFICATIONS
FLUID CAPACITIES) and (Refer to LUBRICATION & MAINTENANCE/FLUID TYPES - DESCRIPTION).
11. Install oil fill cap (Fig. 97).
12. Start engine and inspect for leaks.
13. Stop engine and inspect oil level.
OIL FILTER SPECIFICATION
All engines are equipped with a high quality fullflow, disposable type oil filter. Replace oil filter with a Mopar or the equivalent.
USED ENGINE OIL DISPOSAL
Care should be exercised when disposing used engine oil after it has been drained from a vehicle engine. Refer to the WARNING listed above.