SRT-4 L4-2.4L Turbo VIN S (2004)
Air Door Cable: Adjustments
1. Engage the mode control cable to the actuator arm lever on the mode door and attach it to the housing.
2. Attach the other end of the cable to the A/C-heater control.
3. Turn the mode knob completely counterclockwise.
4. While holding the knob in the counterclockwise position, pull on the gray casing of the mode cable. This will take up any free play in the cable and
index the mode door to the mode knob.
5. Snap the cable hold down clip into position.
