SRT-4 L4-2.4L Turbo VIN S (2004)
Marker Lamp Bulb: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
Ignition Coil
Electronic Ignition Coil Connector
2. Reach behind front bumper fascia forward of front wheel and remove attaching clip from the front side marker lamp.
3. Remove lamp.
4. Remove bulb from socket.
INSTALLATION
1. Install bulb socket into lamp.
2. Place lamp into front fascia .
3. Install attaching clip to the front side marker lamp.
4. Connect the battery negative cable.
