SRT-4 L4-2.4L Turbo VIN S (2004)
Tail Light Bulb: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Move trunk lining as necessary from rear closure panel to gain access to back of tail lamp.
3. Remove bulb socket from tail lamp through openings in rear closure panel.
4. Pull bulb from socket.
INSTALLATION
1. Push bulb into socket.
2. Install bulb socket into tail lamp through openings in rear closure panel.
3. Reposition trunk lining to rear closure panel.
4. Connect the battery negative cable.
