SRT-4 L4-2.4L Turbo VIN S (2004)
Keyless Entry Module: Service and Repair
NOTE: When replacing a faulty RKE Module, the replacement module must be configured with the DRB III(R) scan tool for proper operation.
Additionally, all transmitters must be reprogrammed to the new RKE module.
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel top cover.
RKE Module Location
3. Remove the two screws holding the RKE module to the instrument panel assembly.
4. Slide locking tab of the wiring connector sideways to unlock tab, and remove connector from RKE module.
5. Remove RKE module from vehicle.
INSTALLATION
1. Install the RKE module into the vehicle.
2. Connect the RKE wiring connector.
3. Install the two screws holding the RKE module to the instrument panel assembly
4. Install the instrument panel top cover.
5. Connect the battery negative cable.
