SRT-4 L4-2.4L Turbo VIN S (2004)
Compressor Clutch Relay: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
Power Distribution Center - LHD Shown, RHD Typical
2. Remove the cover from the Power Distribution Center (PDC).
3. See the fuse and relay layout label affixed to the underside of the PDC cover for A/C compressor clutch relay identification and location.
4. Remove the A/C compressor clutch relay from the PDC.
INSTALLATION
1. See the fuse and relay layout label affixed to the underside of the PDC cover for the proper A/C compressor clutch relay location.
2. Position the A/C compressor clutch relay in the proper receptacle in the PDC.
3. Align the A/C compressor dutch relay terminals with the terminal cavities in the PDC receptacle.
4. Push down firmly on the A/C compressor clutch relay until the terminals are fully seated in the terminal cavities in the PDC receptacle.
5. Install the cover onto the PDC.
6. Reconnect the battery negative cable.
