SRT-4 L4-2.4L Turbo VIN S (2004)
Wiper Module Remove/Install
5. Remove the wiper module mounting screws and remove the module from vehicle.
INSTALLATION
1. Install the windshield wiper module into the vehicle.
2. Install the mounting screws and tighten to 7 to 9 Nm (60 to 80 in. Lbs.) torque.
3. Connect the motor posi-lock harness connector .
4. Install the left side cowl cover. Refer to Body, Exterior, Cowl Cover, Installation.
5. Install the wiper arms. Refer to Electrical, Wipers/Washers, Wiper Arm, Installation.
6. Connect the battery negative cable .