SRT-4 L4-2.4L Turbo VIN S (2004)
and cotter pin.
The wheel bearing is a Unit 1 type cartridge bearing that requires no maintenance. The wheel bearing can be serviced separately from the hub.
The hub has five studs pressed into its flange.
OPERATION
The steering knuckle pivots with the strut assembly between the lower ball joint and the pivot bearing in the strut assembly. The steering gear outer tie
rod end connects to the trailing end of each knuckle, allowing the vehicle to be steered.
The center of the knuckle supports the hub, wheel bearing and axle shaft.
The hub and wheel bearing work together. The wheel bearing has internal bearings that allow the hub to rotate with the driveshaft and the tire and
wheel assembly. The hub's five studs mount the tire and wheel to the vehicle.