SRT-4 L4-2.4L Turbo VIN S (2004)
Rear Door Window Glass Weatherstrip: Service and Repair
Front/Rear Door Inner Belt Weatherstrip
FRONT/REAR DOOR INNER BELT WEATHERSTRIP
REMOVAL
1. Remove door trim panel.
Fig. 3
2. Remove weatherstrip from door. Use a rubber mallet and a block of wood, tap upward at each clip holding the molding to the door (Fig. 3).
INSTALLATION
1. Push down on weatherstrip to engage channel to door panel.
2. Install door trim panel.
Rear Door Glass Run Weatherstrip
REAR DOOR GLASS RUN WEATHERSTRIP
REMOVAL
1. Remove door trim panel, water dam as necessary.
2. Remove door glass.
3. Remove weatherstrip fasteners.
4. Pull weatherstrip from lower front channel above door latch.