SRT-4 L4-2.4L Turbo VIN S (2004)
Fig. 5
13. Slowly lower windshield glass to windshield opening fence. Guide the molding into proper position as necessary. Push windshield inward molding
is flush to roof line and A-pillars (Fig. 5).
14. Clean access urethane from exterior with Mopar(R), Super Clean or equivalent.
15. Apply 150 mm (6 in.) lengths of 50 mm (2 in.) masking tape spaced 250 mm (10 in.) apart to hold molding in place until urethane cures.
16. Install A-pillar moldings.
17. Install cowl cover and wipers.
18. Install inside rear view mirror.
19. After urethane has cured, remove tape strips and water test windshield to verify repair.
