Stealth V6-2972cc 3.0L SOHC (1995)
Door Lock: Testing and Inspection
-
The indicator does not blink after pressing the transmission switch of the transmitter.
1. Check or replace the battery.
2. Replace the transmitter.
-
Transmitted wave is being sent from the transmitter (indicator is blinking), but the system does not operate.
1. Check the cryptographic code registering method*
2. Check the keyless entry control unit terminal voltage.
3. Check the coaxial cable of antenna and the ground wire for connection.
-
Only R.H. or L.H. door can be locked or unlocked.
1. Check the door lock power relay 1(for front passenger's door) or door lock power relay 2 (for driver's door).
2. Check the keyless entry control unit terminal voltage.
-
R.H. and L.H. doors can be locked and unlocked by the transmitter but the dome light and foot light do not blink or come on. (Interlocked lighting
of the dome light and foot light by means of the dome light switch or door opening and closing is normal).
1. Check the keyless entry control unit terminal voltage.
2. Check the harness.
NOTE: * Perform this check when replacement of the transmitter and/or keyless entry control unit or faulty storage of cryptographic code has been
made.