dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Door Glass - Rattle/Water Leaks/Sluggish Operation|Page 3974 > < Door Glass - Rattle/Water Leaks/Sluggish Operation|Page 3969
Page 1
background image

Technical Service Bulletin # 231092

Date: 920615

Door Glass - Rattle/Water Leaks/Sluggish Operation

NO.:

23-10-92

GROUP: Body

DATE:

Jun. 15, 1992

SUBJECT:
Door Glass Rattle/Water Leaks/Sluggish Operation

MODELS:

1991-1992 (B7) Stealth

SYMPTOM/CONDITION:

This bulletin addresses three Symptom/Conditions that pertain to door glass operation and service. They are as follows:

1.

Door glass rattle resulting from loose regulator retaining bolts.

2.

Creaking noise from the door glass guide rollers when rolling the glass up and down, due to a lack of lubricant.

3.

Wind noise/water leaks and/or poor door glass fit caused by improper door glass adjustment.

REQUIRED PARTS:

AR Lock N' Seal, Mopar

4318031

AR Lubricant, Mopar Multi-Purpose

4318063

REPAIR PROCEDURE:

Loose Door Glass Regulator Retaining Bolts

This repair procedure involves removing the four door regulator retaining bolts, applying Mopar Lock N ' Seal (PN 4318031) to each bolt and installing
the bolts.

1.

Remove the door trim panel as described in the service manual.

2.

Remove the four door glass regulator retaining bolts (Fig. 1), apply Mopar Lock N ' Seal (PN 4318031) to each bolt and install the bolts.

3.

Refer to the service manual for door glass adjustment procedures or when applicable, the adjustment procedures that follow on page 3 of this
bulletin under Wind Noise/water Leaks/Poor Glass Fit.

Door Glass - Rattle/Water Leaks/Sluggish Operation|Page 3974 > < Door Glass - Rattle/Water Leaks/Sluggish Operation|Page 3969