Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Wiper Relay: Component Tests and General Diagnostics
Intermittent Wiper Relay Check
Intermittent Wiper Relay
1. Remove the quarter trim.
Intermittent Wiper Relay Continuity Table
2. With the intermittent wiper relay connected to the wiring harness connector, let the wiper operate intermediately and check the voltage at terminal
(2).
Wiper Relay Test
Fig.72 Intermittent Wiper Relay Inspection
1. Ensure continuity exists between terminals 5 and 11 and between terminals 6 and 10 and no continuity exists between terminals 6 and 11.
2. Connect positive terminal of battery voltage to terminal 5 and negative terminal to terminal 11 to ensure battery voltage is available at terminal 6.
Rear Intermittent Wiper Relay Test
