Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
NOTE: When tapping the oil seal in, use a plastic hammer to lightly tap the top and circumference of the special tool, press fitting gradually and
evenly.
2. Apply multipurpose grease to the oil seal lip.
Specified grease:
MOPAR Multi-Mileage Lubricant Part No. 2525035 or equivalent
DUST SHIELD INSTALLATION
Orienting the dust shield as shown in the illustration, and using the special tool, press fit the dust shield until it contacts the axle shaft shoulder.
NOTE: When tapping the oil seal in, use a plastic hammer to lightly tap the top and circumference of the special tool press fitting gradually and
evenly.
DUST SHIELD INSTALLATION
With the special tool, install the dust shield so that the depression is facing upward.
NOTE: When tapping the oil seal in, use a plastic hammer to lightly tap the top and circumference of the special tool, press fitting gradually and
evenly.
OUTER BEARING INSTALLATION
1. Apply multipurpose grease around the entire circumference of the inner side of the outer bearing seal lip.
Specified grease:
MOPAR Multi-Mileage Lubricant Part No.2525035 or equivalent
