Stealth R/T Turbo V6-2972cc 3.0L DOHC Turbo (1996)
Clutch Master Cylinder: Service and Repair
1. Drain fluid from clutch hydraulic system.
2. Disconnect fluid sensor connector from brake master cylinder.
3. Disconnect brake lines from brake master cylinder, then vacuum hose.
4. Working from inside vehicle, remove clevis pin retaining brake booster pushrod to brake pedal.
5. Remove four brake booster retaining bolts from brake pedal support bracket.
6. Remove brake master cylinder and booster assembly from engine compartment.
7. Disconnect clutch pressure line from master cylinder.
8. On AWD vehicles, working form inside engine compartment, remove clutch master cylinder retaining bolts.
9. On FWD models, working from inside vehicle, remove master cylinder retaining nuts.
10. On all models, remove clutch master cylinder from engine compartment.
11. Reverse procedure to install, Torque clutch master cylinder retaining nuts to 9 ft. lbs. Torque brake master cylinder retaining nuts to 10 ft. lbs.
