Stratus L4-2.0L VIN C (1997)
![background image](/dodge/stratus/l4-2.0l_vin_c/Page-2537001.png)
Power Seat Motor: Testing and Inspection
Seat Motor Switch Connector
1. Remove power seat switch from seat.
2. Disconnect wire harness connector.
3. Check Pin A for battery voltage and Pin B for ground.
4. To test the seat motor and verify proper seat responses. Using two jumper wires, connect one to a battery supply and the second to a ground.
Connect the other ends to the seat wire harness connector as described in the Seat Connector Chart.