Stratus L4-2.0L VIN C (1997)
Rear Attachment Of HCU To Mounting Bracket
13. Remove the 2 bolts attaching the rear of the HCU to its mounting bracket.
Removal Of HCU Assembly From Vehicle
14. Remove HCU from its mounting bracket. Then remove HCU from vehicle out through the exhaust tunnel in the floor pan of the vehicle.
Installation
PROCEDURE
1. Install the Hydraulic Control Unit (HCU) back in the vehicle and on its mounting bracket using the reverse order of its removal.
Rear Attachment Of HCU To Mounting Bracket
2. Install mounting isolators, washers and attaching bolts, mounting the rear of the HCU to the mounting bracket. Do not tighten bolts at this time.