Stratus L4-2.0L VIN C (1997)
Park Brake Cable Removal From Brake Support Plate
22. Remove park brake cable from rear brake support plate. Park brake cable is removed from brake support plate using a 1/2 in. wrench as shown to
compress locking tabs on park brake cable retainer.
23. Raise vehicle.
NOTE: The park brake cable routing and routing brackets are different on the right and left side of the vehicle.
Park Brake Cable Routing Brackets (Right Side)
Park Brake Cable Routing Brackets (Left Side)
24. Remove the 2 routing brackets attaching the right hand side or left hand side park brake cable to the frame rail.