Stratus L4-2.0L VIN C (1997)
4. Disconnect liquid line from the receiver/drier.
5. Remove the liquid line from the vehicle.
Installation
For installation, reverse the above procedures.
Fig 61 Clip Removal
LIQUID LINE TO CONDENSER
Removal
1. Remove refrigerant from the A/C system using a refrigerant recovery machine.
2. Remove A/C quick connect clip at condenser.
Fig 62 Quick Coupler Using Special Tool 7240
Fig 63 Line At Condenser
3. Disconnect quick connector at condenser. Remove liquid line from condenser. Use special tool kit 7193 to disconnect quick connector. Remove
line at condenser.