Stratus L4-2.0L VIN C (1997)
4. Install the front and rear lateral links and attaching nuts and bolts on the knuckle, Tighten the lateral links to knuckle attaching bolts and nuts to 95
Nm (70 ft. lbs.).
5. Install rear brake support plate assembly onto the knuckle. Install the 4 bolts attaching rear brake support plate to rear knuckle. Tighten the
attaching bolts to a torque of 61 Nm (45 ft. lbs.).
6. If vehicle is equipped with ABS brakes, install speed sensor head into rear brake support plate. Torque speed sensor head mounting bolt to 7 Nm
(60 inch lbs.).