dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Axle Shaft|Removal|Page 4526 > < Axle Shaft|Removal|Page 4524
Page 2
background image

7. Install the steering knuckle to ball joint stud castle nut. Tighten the castle nut to 95 Nm (70 ft. lbs.).

Fig. 6

8. If equipped with antilock brakes, install the speed sensor cable on the steering knuckle and securely tighten bolt. 

Axle Shaft|Removal|Page 4526 > < Axle Shaft|Removal|Page 4524