dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Alignment - Vehicle Drift/Lead At Highway Speeds|Page 1560 > < Wiper Switch|Diagrams|Page 1550
Page 1
background image

Alignment: Customer Interest
Alignment - Vehicle Drift/Lead At Highway Speeds

NO: 02-12-95

GROUP: Front Suspension

DATE: Oct. 27, 1995

SUBJECT:
Vehicle Drift/Lead
At Highway Speeds

MODELS:
1995 - 1996 (JA) Cirrus/Stratus

SYMPTOM/CONDITION:

Vehicle may drift or lead left or right at highway speeds during straight ahead driving. May be more pronounced on crowned roads.

DIAGNOSIS:

Verify vehicle lead or drift, cross switch front tires, and check front cross camber. If vehicle still drifts/leads and front cross camber is excessive, perform
repair procedure.

NOTE

CROSS CAMBER IS THE LEFT CAMBER READING MINUS THE RIGHT CAMBER READING.

REPAIR PROCEDURE:

This bulletin involves adjusting the front suspension camber.

NOTE

DO NOT ATTEMPT TO ENLARGE ANY EXISTING HOLES TO INCREASE ADJUSTMENT.

1.

Raise hood. Mark the position of the four shock absorber mounting bolts on the side that requires camber adjustment (the side farthest from the
preferred setting should be adjusted).

2.

Raise vehicle on a suitable frame hoist so the tires are just off the ground.

Alignment - Vehicle Drift/Lead At Highway Speeds|Page 1560 > < Wiper Switch|Diagrams|Page 1550