Stratus L4-2.4L VIN X (1998)
Heated Glass Element Relay: Testing and Inspection
1. Check fuses.
a. Fuse 15 in the Junction Block
b. Fuse 8 and 12 in the Power Distribution Center.
Rear Window Defogger Relay (EBL)
2. Remove the rear window defogger relay (EBL) from the Junction Block.
3. Using voltmeter, test battery voltage:
a. Test rear window defogger relay terminals 13 for battery voltage. If voltage is OK, go to Step 2. If voltage is not OK, repair A4 circuit.
b. Test the rear window defogger relay terminal for battery voltage with the key in the run position. If voltage is OK, go to Step 3. If voltage is
not OK, repair A31 circuit.
c. Use a known good relay. If not OK, repair circuits as necessary.
