Stratus L4-2.4L VIN X (1998)
Windshield Washer Reservoir: Service and Repair
REMOVAL
1. Disconnect washer fluid hose at in-line connector on top of the right shock tower
2. Partially remove bumper fascia as needed to gain access to the reservoir.
Reservoir Removal
3. Disconnect wire connector from washer pump and harness mounting tab.
4. Slide rearward and drop down and away from vehicle.
5. Drain washer fluid from reservoir into an appropriate container.
5. Disconnect the washer hose from the reservoir.
INSTALLATION
-
For installation, reverse the above procedures.
