Stratus V6-2.5L VIN H (1997)
Front Attachment Of HCU To Mounting Bracket
3. Install mounting isolator, washer and attaching bolt, mounting the front of the HCU to the mounting bracket. Do not tighten bolt at this time.
4. Then tighten the 3 HCU mounting bolts to a torque of 28 Nm (248 inch lbs.).
Rear Brake Tubes And Right Front Brake Tube At HCU
5. Install the 2 rear brake tubes on the proportioning valves and the right front brake tube in the outlet port of the HCU. Tighten the 3 brake tube nuts
to a torque of 20 Nm (180 inch lbs.).
Brake Tubes At HCU
6. Install the 2 brake tubes coming from master cylinder and the brake tube to the left front wheel in the HCU ports. Tighten the 3 brake tube nuts to
a torque of 20 Nm (180 inch lbs.). Install the brake tube routing clip on the HCU mounting bracket and securely tighten attaching bolt.
