Stratus V6-2.5L VIN H (1997)
Speed Sensor Cable Attachment To Rear Suspension
3. Install speed sensor cable routing clips on the brake flex hose bracket and the bracket on the upper control arm. Install and securely tighten the
routing clip attaching bolts.
4. Install connector end of speed sensor cable through hole in inner fender and into trunk of vehicle.
Rear Speed Sensor Cable Attachment To Body
5. Install speed control sealing grommet into hole in inner fender. Install the sealing grommet retainer and attaching bolt on rear frame rail. Securely
tighten retainer attaching bolt.
6. Install the tire and wheel assembly on vehicle.
7. Lower vehicle.
Rear Speed Sensor Cable Connection To Vehicle Wiring Harness
8. Plug speed sensor cable connector into vehicle wiring harness. Install foam sleeve back over the speed sensor cable to vehicle wiring harness
connection to prevent connector from rattling against body of vehicle.
