Stratus V6-2.5L VIN H (1997)
11. Clean all foreign matter from the threads of the outer C/V joint stub axle. Install washer and hub nut onto stub axle and tighten nut.
12. With vehicle brakes applied to keep braking disc from turning, tighten hub nut to 203 Nm (150 ft. lbs.) of torque.
13. Install the spring washer, hub nut lock, and new cotter pin. Wrap cotter pin prongs tightly around the hub nut lock.
14. Install front wheel and tire assembly. Install front wheel lug nuts and tighten in correct sequence. Then tighten to a torque of 129 Nm (95 ft. lbs.).
15. Lower vehicle.
16. Set front Toe on vehicle to required Alignment specification.
