dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Power Window Switch|Testing and Inspection|Page 7414 > < Heated Glass Element Relay|Testing and Inspection|Page 7409
Page 1
background image

Power Window Switch: Testing and Inspection

Master Window Switch

Passenger Window Switch Continuity Test

For switch testing, remove the switch from its mounting. Using an ohmmeter, refer to Window Switch Continuity Charts to determine if continuity
is correct. If the results are not obtained, replace the switch.

The master window switch has an Auto-Down feature. Actuation of the master switch to the second down position will move the drivers side
window completely down. The electronic switch will automatically disconnect the motor approximately 1 second after the window bottoms out.
Failure of the electronic switch to detect stall current, will cause the switch to disconnect after approximately 13 seconds. The auto down function
can be canceled by any movement of that switch.

Power Window Switch|Testing and Inspection|Page 7414 > < Heated Glass Element Relay|Testing and Inspection|Page 7409