Stratus Coupe L4-2.4L VIN G (2003)
REMOVAL AND INSTALLATION
Required Special Tool:
^
MB991654: Cylinder Head Bolt Wrench (12)
REMOVAL SERVICE POINTS
<<A>> POWER STEERING OIL PUMP AND BRACKET ASSEMBLY REMOVAL
Remove the power steering oil pump and bracket assembly from the engine with the hose attached.
NOTE: Place the removed power steering oil pump in a place where it will not be a hindrance when removing and installing the cylinder head
assembly, and secure it with a cord or wire.
<<B>> CYLINDER HEAD ASSEMBLY REMOVAL
CAUTION: Be careful not to damage or deform the plug guides when removing the cylinder head bolts. Plug guides cannot be replaced
separately.
