dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Doors - Various Noises When Opening/Closing|Page 4849 > < Doors - Various Noises When Opening/Closing|Page 4847
Page 2
background image

TIME ALLOWANCE:

FAILURE CODE:

Repair Procedure

NOTE:

DOOR GLASS ADJUSTMENT PROCEDURES ARE FOUND IN VOLUME 1 OF THE SEBRING/STRATUS COUPE SERVICE MANUAL
(GROUP 8S).

Symptom/Condition 1 - Upstop Bumpers (Built Prior To 3/7/01)

1.

Remove the door trim panel.

2.

Lower the window to gain access to the upstop bumpers (attached to the glass) and coat the upper surface of the bumpers (Fig. 1) with weatherstrip
lubricant (Krytox) p/n 04773427.

3.

If no other symptom/conditions exist, re-install the door panel.

Symptom/Condition 2 - Lower Sash (Built Prior To 2/15/01).

1.

Remove the door trim panel.

2.

Lubricate the rear lower sash with silicone spray p/n 04318070 (Fig. 2).

Doors - Various Noises When Opening/Closing|Page 4849 > < Doors - Various Noises When Opening/Closing|Page 4847