Stratus Coupe V6-3.0L VIN H (2001)
Front Door Window Glass: Adjustments
DOOR WINDOW GLASS ADJUSTMENT
1. Remove the door trim and waterproof film.
2. Remove the drip line weatherstrip.
3. Loosen the bolts and nuts of the following parts.
-
Delta sash assembly
-
Power window regulator assembly
-
Glass carrier plate
-
Up-stop
-
Rear lower sash
4. Tighten the power window regulator assembly upper bolts and the glass carrier plate mounting bolts so that the clearances between the
weatherstrip holder and the window glass as well as between the door panel and the window glass meet the respective standard values. (sections A
- A, B - B, C - C, D - D, E - E.)
CAUTION: The right and left adjusting bolts should turned by the same number of threads.