Stratus Coupe V6-3.0L VIN H (2001)
Extend the shoe and lining assembly, and remove the shoe hold-down cup.
INSTALLATION SERVICE POINTS
>>A<< Adjuster Installation
Install the adjuster so that the shoe adjusting bolt of left hand wheel is attached towards the front of the vehicle, and the shoe adjusting bolt of right
hand wheel is towards the rear of the vehicle.
>>B<< Shoe-To-Anchor Spring Installation
CAUTION: The load on the respective shoe-to-anchor springs is different, so the rear side spring In the figure has been painted.
Install the shoe-to-anchor springs in the order shown in the illustration.